Knit a bonnet for a Little Red Riding Hood doll. We knit different types of hood using knitting needles according to the pattern with description

The hood is one of the stylish details of the fashion season during the cold season. But this is far from new. Hats, like two peas in a pod similar to those of today, appeared in the wardrobe of fashionistas back in the 19th century. It is not surprising that today it is again at the peak of popularity: the hood is both beautiful and comfortable to wear. It combines two wardrobe items: a hat (or hood) and a warm scarf. Its models are very diverse. Among them you can choose quite simple ones. Even a novice craftswoman will be able to knit a bonnet for herself and her family.

The hood is fashionable and warm

There are a lot of hood models. Women prefer them to hats because they look very elegant in them. The hood can always be pulled back from the hair, and it will become a voluminous scarf around the neck. It also doesn’t spoil your hair as much as a hat.

The children's hood fits well to the head and at the same time gives freedom of movement. It covers the small neck and chest area well. Some models extend the lower part even over the shoulders. Toddlers, who usually resist hats, wear a bonnet with pleasure. For these qualities, mothers are very fond of this item of children's wardrobe.

Knitting a bonnet hat with knitting needles is quite easy. First, a model is selected that will best suit the face shape and show its owner in the best light. The most common types of this headdress are:

hood-pipe;
hood with long scarf;
hood with ties or buttons;
cap;
hood Daisy.

Knitting methods and simple patterns

Experienced knitters know many methods and patterns for crocheting a bonnet hat. The master class will help beginners master this handicraft. Description of the work on making a hood with ties:

Cap for a child

In a similar way, you can knit a bonnet for a baby using knitting needles. Take two measurements. The first is from the bottom of the left earlobe to the right, through the head. The second is the volume of the neck under the jaw, with an allowance for a loose fit.

Make a sample: cast on 10 loops and knit 10 rows in garter stitch or other pattern chosen for the hat. Based on the size of the resulting square, calculate the required number of loops for casting on. Cast on the number of loops corresponding to half the neck volume measurement.

All that remains is to decorate as desired and sew ties at the corners of the hat. You can sew a pompom to the top of the cap.

Tube hood for women

This is a long-known type of headdress. And probably the easiest to implement. You can knit a pipe from yarn of various thicknesses and compositions. Mohair, wool, acrylic and other types of threads are suitable.

It is most convenient to knit fabric on circular knitting needles. If you knit a straight fabric, you will have to make a seam along the entire length of the edge. But if done carefully, it will not spoil the appearance of the product.

The knitting height is measured individually on the model during work. The diameter also depends on the desire of the fashionista. The product can be slightly widened towards the bottom edge for a beautiful distribution over the shoulders.

Fashionable hat Daisy

The knitting pattern for a hood is not as complicated as it might seem. The principle remains the same: the fabric is knitted and sewn together like a hood. It's all in the details:

Having mastered one of the methods of knitting this headdress, having understood the principle of its creation, you can make many other patterns and create your own - fashionable and unique accessories that will warm and delight you in the cold season.

Attention, TODAY only!

Knitting is a painstaking and time-consuming process. Girls and women can learn needlework at any age. At home, you can knit a bonnet with your own hands using yarn of different textures, shades and prints. The hood is a warm and practical product that will appeal not only to adults, but also to children. You can quickly master the knitting technique, and the process takes about 3-4 days.

Before starting work, you need to understand and find out what a hood is, what it is made of, what it can be . There are several varieties:

hood with short hood;
hood with scarf;
cap for small children.

Each model has its own advantages and features. Professional knitters can combine several patterns at the same time to get a product of the desired design. Openwork and solid patterns can be used for knitting. You can master different techniques without the help of specialists. There are various master classes with step-by-step technologies and video tutorials, thanks to which you can understand how to knit a bonnet hat with knitting needles.

A bonnet is one of the types of hats. They are easy to perform and do not require special knowledge or extensive experience. The basis of the presented header is a large rectangle. Experienced craftswomen can make a bonnet in one evening. You can knit in different ways - crocheted or knitted.

For adults there are also models, diagrams and detailed descriptions of hoods. It may consist of a wide lower collar. For decoration, you can use a frame with decorative buttons, beads, stones or clasps. Another popular and sought-after model is the pipe hood. The hat is knitted according to any pattern.

The product is a large specific scarf that has a circular shape. It can be worn on the head to provide good coverage of the ears, throat and head. Its shape is a rectangle that is knitted in the round, without a seam. To connect two parts, use a single seam. The main part must have a width of 70 cm or more. The optimal height is 50 cm.

Bonnet with long ties

Many needlewomen choose a crochet hook when choosing a knitting pattern. But to quickly knit a hood, you can use knitting needles. For crocheting, it is important to master the technique and be able to knit simple openwork elements and patterns. The bonnet model with long ties is liked by many girls and women. It attracts with its original appearance.

For knitting you need to prepare the following materials and tools:

mohair yarn - about 450 grams;
regular and circular knitting needles - size 4.5 mm;
one pin.

To knit a hat correctly, you need to master the technique of garter stitch, Irish pattern, stockinette stitch. The optimal pattern density when choosing a garter stitch is about 11 units horizontally. There should be about 20 rows along the vertical side.

Detailed master class on knitting a bonnet with long ties:

To decorate the hood, you can use various openwork crocheted or rose patches. To knit a flower, take yarn of a different shade and cast on 100 air loops on the hook. 6 single crochet stitches are knitted into each loop. Knit to the end of the row, close it, form a rose and sew on the hood.

Hat according to the Daisy pattern

Increasingly, needlewomen are using the “Daisy” scheme and pattern. This is a popular headdress model. For knitting, you can use knitting needles or a crochet hook. It all depends on the personal preferences of the knitter. The knitting pattern for a bonnet with “Daisy” knitting needles is quite simple. You need to prepare knitting needles number 5, bulky yarn. On average, one hat takes about 250-350 grams. Thread consumption depends on the knitting density and the selected yarn.

Step-by-step knitting technology:

At the last stage, needlewomen need to knit a large rectangle. You need to start working after taking measurements. When it is ready, you can sew the parts to the top of the hood. It is important that the lower and upper parts are equal in width and length.

The “Daisy” hood looks beautiful together with various decorative elements, openwork inserts, knitted roses, and pom-poms.

The bonnet is a sought-after and popular headdress, which is particularly popular. It first appeared at the beginning of the 19th century. The hat is worn by little girls, women and girls. It is suitable for the fair sex of different ages. The main features of the knitted product are that the cap fits snugly to the child’s head and can be secured with a ribbon under the chin.

It is well fixed, regardless of weather conditions and strong winds. The hoods come in lace and openwork, so they look beautiful and unusual.

To complete the crocheted bonnet hat master class, you need to learn all the conventions in knitting, the technique of creating air loops, double crochets and single crochets.

The hood-hat, as soon as it appeared, immediately became the favorite accessory of all fashionistas. Of course, the prices for this product also increased rapidly. Therefore, most of the beautiful ladies thought about making this headdress with their own hands. You can bring your idea to life. An article on how to crochet a bonnet will help you with this.

If you ask experienced needlewomen about which knitting threads are best to use to make the product under study, everyone will answer that wool yarn is the most preferable. Because a bonnet is worn in the cold season. Therefore, first of all, it must protect the head from the negative effects of the environment.

However, if a beautiful person has a tendency to allergic rashes, you should pay attention to children's yarn. It is ideal for delicate and sensitive skin. Or you can shell out for more expensive wool. Alpaca wool, merino wool, and angora are best suited for crocheting bonnets.

To knit the product under study with simple stitches, you can use melange yarn. It consists of many multi-colored threads, making the product look impressive and original. But for knitting a patterned hood it is better not to buy this yarn. Experts say that it is better to decorate a complex pattern with a monochrome thread.

Professional needlewomen are convinced that it is much easier to crochet a hood with a crochet hook made of metal. It ensures good thread glide, which means it has a positive effect on the creative process. The product turns out more neat and beautiful. Plus, it knits much faster. However, the tool must be selected taking into account the knitting threads and the selected pattern. For the product under study, fairly dense patterns are most often chosen. And they will be possible to complete if you work with a hook equal to the thickness of the thread in diameter.

Features of taking measurements

Before you start crocheting a bonnet, you need to measure the head of the person for whom the accessory you are studying will be created. Many novice craftsmen prefer to use standard parameters. But professional knitters are convinced that they do not always help out. The thing is that people differ from each other in body structure. Therefore, very often a product made according to a template turns out to be small or, on the contrary, large. In order not to have to unravel and bandage your idea, it is better to take the measurements yourself:

Take a measuring tape, paper and pen.
We measure the distance from the top of the head to the seventh vertebra (base of the neck) and mark the parameter on paper.
We determine the girth of the neck and also write it down.
And then we fix the girth of the head (above the eyebrows through the most convex point of the back of the head) and also indicate it on paper.

Technology for converting centimeters into loops and rows

A crocheted bonnet will turn out to be very beautiful and original only if you calculate in advance the number of units of measurement needed for crocheting. Of course, we are talking about loops and rows.

To make simple calculations, you need to prepare a sample of the selected pattern:

To do this, we knit a chain 10 cm long.
Then we raise it in height so that the final length of the sample is 10 cm.
In the resulting square we count loops and rows.
After this, divide the neck circumference and head circumference by 10.
We multiply the two obtained values by the number of loops in the sample. We fix the new numbers on paper. We will knit using them.
We calculate the rows in the same way. Divide the distance from the top of the head to the seventh vertebra by 10 and multiply by the number of rows in the sample.

Having completed the calculations, we begin creativity - crocheting a hood.

Model No. 1

To implement the first option, you need to prepare light brown yarn and a hook of a suitable size.

We cast on a number of loops equal to the circumference of the neck. Then add another 10 - 15.
We close the chain into a circle and then knit, moving in a spiral. We do not make additions or subtractions. Our task is to knit a “pipe” 10 - 12 rows long.
Then you need to think about how the addition of loops will be done. To do this, we subtract the current ones from the loops needed to encircle the head. Distribute them evenly onto one row. That is, at the same distance from each other.
We add loops by knitting two stitches from one loop of the previous row.
Next, we crochet the bonnet with a smooth cloth, moving back and forth.
When you manage to knit a hood, the length of which is equal to the distance from the top of the head to the base of the neck, turn the product inside out, fold it in half and use a hook or sewing needle to connect the upper part of the resulting hood.
Then, if desired, we tie the ears and sew them to the headdress.

Model No. 2

The next version of the accessory being studied is suitable for those who want to protect not only their head, but also their neck. Moreover, this hood is knitted from top to bottom. But it also looks impressive.

To perform it, you should make a chain, the length of which is equal to the circumference of your head.
Then we knit an even fabric, reaching the distance from the crown to the seventh vertebra. We also do not make increases or decreases.
Having reached the desired size, reduce the loops to the width of the neck and begin to knit in a spiral.
If desired, we decorate the neckline with knitting needles, knitting a single elastic band. Or we continue to crochet and knit single crochets. You can adjust the length of the collar yourself. But traditionally it does not exceed two neck lengths.
When, based on the description, we manage to crochet the hood, we bend the part of the hood located near the face and carefully tie it to secure it.

Model No. 3

If you don’t want to spend too long and hard on implementing an idea, you can make a lightweight version of the product. It is a wide snood that can be used as a hood. It is really easy to do, so even inexperienced craftsmen can get to work.

Work begins with a set of loops, the number of which is equal to the circumference of the head.
Next, we close the chain into a ring and knit the product, moving in a circle. In this case, you will not have to decrease or add loops, as well as knit individual parts or sew the finished product.
You just need to tie the pipe. Its minimum length is 1.5 times the distance from the crown to the seventh vertebra.
If you want to make a voluminous hood, you should knit a few more rows.

This product is convenient because you can try it on to evaluate the result and, if necessary, modify it.

We hope that after reading the article, you were able to make sure that crocheting a hood is not at all difficult. The main thing is to set a goal and not quit your job if something suddenly doesn’t work out.

We are used to knitting? painstaking and labor-intensive work. But when it comes to children, it can be difficult to choose clothes or a hat for them, then the art of needlework comes to the rescue. Nothing can replace a warm handmade hat, especially if it was made by your mother. In this tutorial you will learn how to knit a bonnet hat. This is a very warm and practical model because it covers the ears and neck. Your child in such a hat will definitely not get through the icy wind. Beginning needlewomen can also try their hand, because classic, easy patterns will be presented that will make it easy to master the technique of knitting or crocheting.

How to knit a bonnet for a girl with your own hands

Among the many knitted patterns, there are classic options that do not lose their relevance from year to year. So, if you want to knit a hat for your daughter or granddaughter, then it is better to take proven patterns. In this master class you will learn how to knit a daisy pattern. It perfectly matches delicate knitted headdresses for girls. This idea is not new, but very popular this winter season.

To knit a beautiful and warm hat for a girl, you will need:

thick yarn, about 150 g;
knitting needles No. 8.

As you can see, to achieve the effect of volume, it is better to take thick materials. If you do not have thick yarn, then use regular wool threads, folding them several times. Let's start the process of creating a winter headdress:

We prepare the necessary materials. Our base will be knitted from classic loops. The fabric itself is knitted with a beautiful, original pattern. The pattern of the "Dais" pattern is shown in the photo below.

We put on the knitting needles the number of loops for the cross elastic that corresponds to the measurements of the circumference of the child’s head and add 20 cm. This is done because the ties in this model of headdress are not made separately, and the cross elastic itself is used as ropes. Pompoms are attached to the strings below.
Let's start knitting the daisy pattern. We use about 40 cm of loops in the middle, and close about 10 cm of elastic on each side.
The crown is knitted next. It can be knitted using ordinary stockinette stitch. We also make reductions for subsequent tightening as you like. This can be alternating knit and purl stitches.
We make 3 pompoms from yarn. One will be located on the top of the head, and the other two on the side ties.

If you also really liked this hat, then try knitting it with your own hands, the result will exceed all your expectations! The main thing is to put your soul into the creative process.

We study the detailed creation of a hat for a boy with a description of the work

When knitting a hat for a boy, you don’t need to use ornate patterns; simple patterns are better. We suggest you use regular and English rubber bands. Let's start the master class.

To knit a bonnet hat you will need:

wool yarn in blue shades;
knitting needles No. 3.5.

It shouldn’t take much time to create a hat like the one in the photo. All steps are extremely simple and easy to master for beginners in knitting:

We make the necessary measurements. We knit the base with a regular 1x1 elastic band.

In total, we cast on 103 loops with a thread and continue to knit a 1x1 elastic band with the main thread. At a height of 4 cm, unravel the thread of the cast-on edge and remove the open loops onto an auxiliary needle.
In the next row we knit together 1 loop from the main and auxiliary needles. Using knit and purl stitches we form a hem, and then continue knitting the English rib.
Let's start making the pattern using an English elastic band. 1st row? alternate 1 knit stitch with 1 purl loop, ending with a purl stitch. The 2nd row and all subsequent rows are knitted like the first, but together they no longer knit two loops, but a pair of yarn over loops.
When closing an English elastic in the classic way, a pair of yarn over loops should be knitted together, with a knit stitch, and a purl loop should be knitted with a purl stitch; in this case, the edge will not be elastic. To obtain an elastic edge of the elastic, the last row must be closed using method 3, but the pair of loops and yarn overs must be picked up with a needle as one loop.

At a height of 13 cm, remove the last 37 loops from the auxiliary knitting needle and knit the central 29 loops, knitting together the last and first loops of the row from the auxiliary knitting needle 37 times.
For the collar, we lift 34 loops along the edges of the side parts and remove 29 loops from the auxiliary needle, for a total of 97 loops. We continue to knit with an elastic band. After 14 cm we close the loops.
We make the central seam of the collar. We moisten the finished hat and let it dry for a while.

Video on the topic of the lesson

Video tutorials will help you quickly master the technique of creating a bonnet. Happy crafting and easy stitches!

We knit different types of hood using knitting needles according to the pattern with description

Not long ago, a knitted headdress for women called a “Kapor” came into fashion. The modern bonnet comes from an ancient headdress of the same name. This prototype of a woman's bonnet was similar to both a cap and a hat. The hat of the old bonnet has a hard brim and a fairly high top, which is necessary for the strands gathered at the back of the head. The bonnet is also similar to a cap because it has ties under the chin. Nowadays, a bonnet is a warm headdress for a woman or girl, which is tied or connected at the bottom, under the chin. The model without ties at the bottom looks more like a hood, and is a slightly transformed look of the classic hood. This is already something between a bonnet with ties and a now fashionable scarf called “Snood”. Some of you will prefer the model with ties, as in the master class, which will be discussed below. But some fashionistas will prefer an option that is closer to a hood.

Knitting a bonnet with long wide ties

The master class invites you to consider how to properly knit a hood with knitting needles. The appearance of this particular model is extremely original, and therefore will appeal to many women. The versatility of such a hood is that its long ends allow it to be adapted not only for a woman, but also for a girl. Guided by the description that is present in the master class, you can easily cope with needlework and knit this spectacular hood with knitting needles. For work, we will prepare four hundred grams of mohair, regular and circular knitting needles, size four and a half, as well as a large auxiliary pin for pinning the rose. The master class contains such patterns as garter stitch, stockinette stitch, as well as an Irish pattern, the diagram of which you will find below. The density of the main pattern (garter stitch) is eleven pieces horizontally and twenty rows vertically in a ten by ten centimeter (cm) square.
Let's start by making the bottom of the hood, using this pattern.

To knit the bottom of the hood you will need the following pattern.

After this, you need to make a long rectangle using garter stitch.

To knit such a rectangle you will need a set of thirty units. After casting on, we knit one hundred and eighty cm, and close the last row. Next, you need to make six rows of white yarn along the entire edge of the rectangle. In addition, we knit six rows along the bottom of the back of the women's bonnet. Now all that remains is to sew the back of the hood to the rectangle. To form a rose, you need to dial one hundred units, and knit, adding loops six times, one at a time, through a row. After this, we make decreases, adhering to the same order. Now close the row and make a rose. Now the headdress for women is ready.

Bonnet with elastic pattern

This version of a women's bonnet with knitting needles will require three hundred grams of bulk yarn, and knitting needles number five or six. A women's bonnet is knitted very simply. First you need to decide on the number of loops (P). To do this, we will calculate the work density. By determining the number of horizontal loops and the number of vertical rows contained in a ten by ten cm square, we can correctly calculate the cast-on loops. In this example, we cast on fifty loops and knit nine centimeters with an elastic band (P) two by two. Having finished this piece, we transfer (P) to an additional contrasting thread, and continue to perform the back part. To do this, we will perform a set of P according to calculation, and connect P a two-by-two rectangle of the required dimensions. Its length and width will depend on what shape of women's bonnet you want to get. Having finished making the back part of the hood for women, close all the P's and sew this part to the elastic band. And at the end of the needlework we knit the largest rectangle of the same R two by two. We must make it according to measurements, and then sew it to the top of the woman's headdress.
As you can see in the photo, the elastic bands of the upper and lower parts are perpendicular to each other. This is a simple knitting pattern for this bonnet for women.
Using this principle, you can knit another hood model with the pattern you like.

Video lesson on knitting a baby bonnet

The video master class will tell you how to knit a beautiful children's bonnet with knitting needles. This model is somewhat different from the headdress for women. We measure the circumference of the head, and for a size of fifty centimeters we dial seventy-four P, and knit P seven cm. Knitting 1x1 elastic is done on circular knitting needles in the round. Then we remove twenty P’s on a contrasting thread, and knit the remaining P’s with knitting needles in the “Honeycomb” pattern, to a height of fifteen cm. Next, we divide all the P’s on the knitting needles into three parts. There are nineteen units on the sides, and sixteen in the center. Now you need to round off the hood for the girl. For this purpose, we knit two Ps together in the central zone, as shown in the video. This operation is performed on the same principle as rounding the heel in socks. After this, we cast on loops in a circle and knit fifteen centimeters with a 1x1 elastic band. We need this size in order to wrap it in two turns. As a result of this lapel, a children's bonnet with knitting needles will turn out much warmer. To decorate the hood, let's crochet the braid and form it into a beautiful snowflake. The snowflake, in turn, is decorated with pearls and sparkles. At the end of the needlework we will tie the lower semicircular parts of the hood. To do this, we first cast on half the loops in front along the bottom of the product, and knit the fabric in garter stitch, decreasing by two units in every second row. As a result of these decreases, the canvas comes out semicircular in shape. We knit the same fabric, picking up loops from the back half of the bottom.

Video master class on knitting a women's bonnet

This lesson will teach beginners how to knit a bonnet for women. At the beginning of needlework, take measurements along the oval of the face, as shown in the lesson, and add three centimeters to the measurement. In the master class, this is sixty-seven cm. Then we take a measurement of the depth of the woman’s bonnet. The depth of the hood is measured between the two temporal lobes, plus three centimeters. In this case, it was forty-two cm. The bonnet for women is most often knitted in the shape of a rectangle. Its dimensions are forty-two by sixty-seven cm. After the canvas is ready, it must be folded in half and sewn. The part of the hood that is directly adjacent to the face is often made with a double elastic band so that it does not stretch. But you and I will make a wide and long braid, fourteen rows long, because it is very fashionable now. We will knit the rest of the women's bonnet with a pearl pattern, because it is dense and voluminous. First, let's make a sample of ten loops and determine the density of the work.
Based on it, we cast on forty-eight Ps on knitting needles number six. Of these, ten loops will go to the Braid pattern, and the rest to the pearl pattern. The braid knitting pattern is completely simple and accessible for beginners. To cross the Braid pattern, remove the first of ten Ps, then transfer the next four Ps to an additional knitting needle, in front of the work. Next, we knit the next four units, again place the postponed Ps on the working knitting needle, and knit them. The tenth P is performed as a facial one. The remaining P rows are knitted with the “Rice” pattern. Having finished making the rectangle fabric, we sew it together. As a result, we get such a cute women's bonnet with knitting needles. You can sew a button at the bottom of the hood and fasten it so that it fits to the head. There is another option, when loops are collected along the bottom of the hood and a thick elastic band is knitted. In this case, the bonnet is worn without a scarf, because P successfully replaces it. Knit the elastic longer so that it covers your neck well.

Photo lessons of knitting a bonnet

Comments

Knit a sweater for a girl: knit according to the pattern with description and photo